Carlisle | Smalley & Company

Filter

Search Within Brand

: Bentonite Waterproofing (5)
Broadcast Sands (1)
Butyl Tapes (1)
Deck & Traffic Coatings (3)
Drainage Systems (17)
Expanded Polystyrene Board (2)
Extruded Polystyrene Board (1)
Fluid-Applied Waterproofing (15)
Foam Insulation (2)
Insulation Adhesives (5)
: Water (1)
Synthetic Rubber (1)
Rubber/Solvent Blend (1)
Solvent Based (1)
Polymer Based (1)
: ASHRAE, NFPA 285 (2)
ANSI/ISEA 105 (1)
Federal Specification TT-S-00227E, Type II, Class A, ASTM C920-79 Type M, Grade NS, Class 25, ASTM D412/C661/C679/C603/C639/C794/C719/C792/C510 (1)
ASTM D412/C836 (1)
ASTM C920/D412/C719/C661 Type S, Grade NS, Class 25, Use NT, Federal Specification TT-S-00230C Type II, Class A (1)
AAMA 714-15, Type S, Grade NS, Class 25, Use NT per ASTM C920/D412/C1305/C661 Standard Specification (1)
: Commercial, Above Grade Wall (2)
Termination Bar, Soldier Pile, Pipe Penetration, Transition, Inside Corner and Other Critical Area (1)
CCW Self-Adhering Flashing/Membrane (1)
Air Spray System (1)
Roller, Brush or Spray (1)
Cleaning and Priming (2)
R2+ Polyiso Insulation Board, CCW MiraDRAIN Drainage (1)
Substrate Preparation (1)
Cow Self-Adhered Flashing on OSB Sheathing, Gypsum Sheathing, Plywood, Wood Framing, Building Paper, Asphalt-Impregnated Felt, Polymer-Based House Wrap, Rigid PVC, Concrete and Metal Surface (1)
Air and Vapor Barrier/Temporary Roof to Approved Substrate (1)
: ASTM D412/E96A/E96B/D146/D903/D4073/E154/D882/D1876/D570/E2178/E2357/D1970/D4541/E84/1354, NFPA 285, AATCC 127 (3)
: 700 Square Foot per Gallon (1)
450 Square Foot per Gallon (1)
125 Square Foot per 5 Kilogram (1)
: Synthetic Polymer (2)
Polymethyl Methacrylate (1)
: Liquid (1)
: Gray (1)
Black (2)
Green (2)
Blue (3)
Yellow (1)
Clear (1)
White (3)
Brownish Gray (1)
Silver (1)
Blue-Gray (1)
: Amber (1)
Olive Drab to Dark Gray (1)
Pale Blue (1)
Transparent (1)
: 50 to 70 Percent (Acetone), 20 to 40 Percent (Parachlorobenzotrifluoride), 1 to 7 Percent (D-Limonene) (1)
Solvent Naphtha, Petroleum, Light Aliphatic (1)
: 5 Gallon (9)
1.5 Gallon (1)
12 Ounce (1)
50 Gallon (1)
1 Gallon (3)
40 Pound (1)
20 Fluid Ounce (2)
8 Pound (1)
20 Ounce (1)
5 Kilogram (2)
: 29 Fluid Ounce (1)
: Foil Sausage (1)
Pail (12)
Bag (1)
Can (2)
Drum (1)
Tube (1)
Aerosol Cylinder (2)
Sausage (2)
Aerosol Can (1)
: Nylon (1)
: Polyurethane (Outer) (1)
: White (1)
Blue (2)
: -4 Deg F (1)
65 Deg F (1)
: 2 Inch (2)
2.3 Inch (1)
2.5 Inch (2)
3 Inch (1)
3.5 Inch (2)
4 Inch (2)
1 Inch (2)
: Structural Insulation Geofoam (1)
Wall Insulation Sheathing Board (1)
Waterproofing Sheet Membrane (5)
Termination Bar (1)
Membrane Liquiseal Kit (2)
Pressure Sensitive Elastoform Flashing (2)
Sheet Membrane (7)
Protection Board (2)
Reinforcing Fabric (3)
Bentonite Waterproofing (1)
: 75 Foot (1)
100 Foot (3)
: Tan, Dark Green (Liner) (1)
: Closed Cell Polyisocyanurate Foam (Core), Aluminum Foil/Kraft Paper (Facer) (1)
Closed Cell Polyisocyanurate Foam (Core), Coated Glass (Facer) (1)
Acrylic (Adhesive), Polyethylene (Liner), Proprietary Film (Carrier) (1)
Closed Cell Polyisocyanurate Foam Core, Matte Coated Glass Facer (6)
Closed Cell Polyisocyanurate Foam Core, Aluminum Foil/Kraft Paper Facer (6)
: 250 Deg F (2)
: -100 Deg F (2)
: 6 Foot (1)
18 Foot (1)
: 300 PSI (1)
400 PSI (1)
200 PSI (1)
: Internal Braided (1)
: 4 Foot x 8 Foot (14)
: 10 to 15 Minute (Skin Formation) (1)
20 Mil (Membrane), 20 Minute (Tack Free), 5 Minute (Open) (1)
40 Mil (Membrane), 45 Minute (Tack Free), 15 Minute (Open) (1)
60 Minute (Recoat), 6 Hour (Full Cure) (1)
: 69.000 Pound (1)
38.000 Pound (1)
53.000 Pound (1)
: 2 Roll per Box (1)
1 Roll per Box (1)
6 Roll per Box (1)
: 45 to 180 Deg F (2)
40 Deg F (1)
60 to 90 Deg F (Storage) (1)
60 to 90 Deg F (2)
20 to 110 Deg F (Application), 40 to 200 Deg F (Service) (2)
: 60 Deg F (1)
: Square Edge (2)
Adjustable (1)
Urethane (1)
EPDM (1)
Water Based (1)
1-Component (1)
Seam Tape (1)
Synthetic Rubber (1)
Synthetic Rubber, Low-VOC (1)
Liquid Flashing and Detail Sealant (2)
: 4 Inch (1)
12 Inch (1)
18 Inch (1)
6 Inch (1)