Senergy Strong 15 15 Oz 38" X 75' Roll 2/Cs

38' x 75', 4 x 4 Fabric Count, White, Glass Fiber, Balanced, Open Weave, Butted Edge, Wall System Reinforcing Mesh

Embed Strong 15 or Hi-Impact 20 Reinforcing Mesh in wet base coat by troweling from the center to the edges. Butt strong 15 or Hi-Impact 20 Reinforcing Mesh at all adjoining edges, do not use to backwrap or bend around corners. Butt strong 15 or Hi-Impact 20 Reinforcing Mesh at adjoining edges of Corner Mesh. Ensure Reinforcing Mesh is free of wrinkles and embedded in Base Coat so that no Reinforcing Mesh color is visible. After Base Coat with embedded Reinforcing Mesh is dry and hard (normally 8 to 10 hours), apply a layer of Flexguard 4 or Intermediate 6 Reinforcing Mesh over the entire surface to achieve total nominal Base Coat/Reinforcing Mesh thickness of 2.4 mm (3/32″).