Senergy Self Adhering Reinforce Mesh Tape 4"X 150'

4' x 150', Gray, Glass Fiber, Balanced, Open Weave, Self-Adhering, Wall System Reinforcing Mesh

Substrate shall be acceptable to Master Builders Solutions Wall Systems. Substrate shall be dry, clean, sound and free of release agents, paint or other contaminants. Verify that the substrate is flat, free of fins or anything that would hinder adhesion of the mesh. Unsatisfactory conditions shall be reported to the general contractor and corrected before application of the Senergy Wall System. Senergy Self-Adhering Mesh tape may be applied direct from the roll. Center the mesh over the area to be reinforced. Firmly press the mesh onto the surface while unrolling. Avoid creating wrinkles and fish-mouths. If they occur cut out the area with a utility knife and re-apply. Overlap ends of Senergy Self-Adhering Mesh tape a minimum of 63.5 mm (2 1/2″). Cover Self-Adhering Mesh tape with a layer of Senershield.