Epoxy Grouts

Filter

Search Within Category

: Euclid (8)
L&M Chemical (1)
Laticrete (3)
MasterFlow (5)
Pecora (1)
Quikrete (2)
Sikadur (7)
Sikagrout (4)
WR Meadows (2)
: UL (1)
ASTM-C1107/C-266/C-939/C-109/C-940/C-1090, USDA (1)
ASTM C-1107/C-827/C-266/C-939/C-109/C-940/C-1090 (1)
ASTM C293/C496/C827/C882/C939/C942/C1090/C1107/C1437, USDA (1)
: School/Hospital/Church (1)
Grouting Under Equipment, Including Heavy Impact and Vibratory Machinery, Reciprocating Engine, Compressor, Pump, Presses, Crane Rail (2)
Multi-Purpose, Grouting Under Equipment, Including Heavy Impact and Vibratory Machinery, Reciprocating Engine, Compressor, Pump, Presses, Crane Rail (1)
Non-Shrink Grouting of Machinery and Equipment, Base Plate, Sole Plate, Precast Panel, Beam, Column and Curtain Wall, Grouting Rebar, Bolt, Dowel and Pin (1)
Railing Post, Foundation, Windmill, Compressor, Non-Shrink Grouting of Machinery and Equipment, Base Plate, Sole Plate, Precast Panel, Beam, Columns and Curtain Wall (1)
General Purpose, Machine and Column Base Plate, Anchor Rod, Bearing Plate, Pour or Pump as High Flow, Bedding Joint in Pre-Cast Concrete Section, Filling Cavity, Void, Gap and Recesses, Indoor and Out (1)
: Gray (4)
Limestone (1)
Dark Gray (1)
Concrete Gray (5)
Dark Brown (1)
Gray Powder (1)
: 15600 PSI (2)
13300 PSI (1)
: 5 Gallon (1)
50 Pound (3)
3 Gallon (1)
60 Pound (1)
65 Pound (1)
1.5 Cubic Foot (1)
0.5 Cubic Foot (1)
20 Cubic Foot (1)
1.17 Gallon (Part A), 0.98 Gallon (Part B) (2)
0.25 Gallon (1)
: Pail (1)
: Pail (1)
Bag (5)
: Epoxy Grout Kit (3)
Non-Shrink Grout (2)
Cementitious Grout (2)
Non-Metallic Grout (1)
Grout (1)
Epoxy Grout Patch Kit (1)
Epoxy Grout (8)
Baseplate Grouting System (1)
: Less Than 15 Min Initial/Less Than 2 Hour Final (Dry Pack), Greater Than 2 Hour Initial/Less than 6 Hour Final (Plasting), Greater Than 3 Hour Initial/Less Than 7 Hour Final (Flowable), Greater Than 4 Hour Initial/Less Than 8 Hour Final (Fluid) (1)
30 Minute (Initial), 45 to 60 Minute (Final) (1)
3.5 to 4.5 Initial/4.5 to 5.5 Hour Final (Plastic), 4 to 5 Hour Initial/5.5 to 6.5 Hour Final (Flowable), 4.5 to 6.5 Hour Initial/6 to 8 Hour Final (Fluid) (1)
45 Minute (Working) (1)
: 41 to 86 Deg F (Application), 40 to 95 Deg F (Storage) (2)
41 to 89 Deg F (Storage) (1)
65 to 75 Deg F (Product), 40 to 95 Deg F (Storage) (2)
65 to 75 Deg F (Application), 40 to 95 Deg F (Storage) (1)
: 2300 PSI (2)
5000 PSI (1)
: Non-Shrink, Non-Metallic (1)
3-Component, Moisture Tolerant, Pre-Proportioned (3)
Non-Shrink, Non-Metallic, High Performance, Fast Setting (1)
1-Component, Free Flowing (1)
3-Component, High Strength, Pre-Proportioned (1)
Non-Sag, Silicone, Acrylic Latex (1)
High Strength, Non-Metallic, Non-Shrink (1)
Non-Metallic, Non-Shrink (1)