Sikafloor 22Na Purcem Medium Duty 3 Part Unit Oxide Red
Part #SIKAFLOOR 22NA OR
Pickup In store, Our Truck, UPS/LTL Shipping Options
Free Truck Delivery On Orders Over $500
Need Help? Find A Branch | Contact Us
- 59.83 Lb, 199.99 Deg F/424 Deg F Flash Point, 3-Component, Self-Leveling, Oxide Red Sikafloor®/PurCem® Cementitious Urethane SlurrySikafloor®-22 NA PurCem® is a self-leveling, solid color, three component, cementitious urethane Mortar designed to provide excellent resistance to abrasion, impact, and chemical attack. Sikafloor®-22 NA PurCem® is broadcast with dried quartz sand and sealed with Sikafloor 31NA PurCem to produce a solid color finish, or can be broadcasted with colored quartz aggregate and sealed with Sikafloor resinous flooring products for a decorative finish. The system is typically installed at 3/16'' to 1/4'' (188 to 250 mils) thickness.
- Can be Applied on Green Concrete, Typically 7-10 Days. Full 28 Days Cure Time is Not Necessary
- Can be Applied over Partially Cured Concrete Substrates (> 4% Mass (pbw -Part by Weight) as Measured with Tramex® CME/CMExpert Type Concrete Moisture Meter Surface Moisture)
- Can be Applied to Concrete Substrates Where
- Substrate has Tensile Bond Strength in Excess of 218 PSI (1.5 MPA). Substrate has Tensile Bond Strength in Excess of 218 PSI (1.5 MPA)
- Resists a Very Wide Range of Organic and Inorganic Acids, Alkalis, Amines, Salts and Solvents. Consult Sika Technical Service for Full Details. Refer to the Sikafloor -22 Na Purcem Chemical Resistant Chart
- Similar Coefficient of Thermal Expansion to Concrete Allowing Movement with the Substrate through Normal Thermal Cycling
- It will Perform and Retain Its Physical Characteristics through a Wide Temperature Range from -40 Deg F (-40 Deg C) up to 248 Deg F (120 Deg C)
- Steam Cleanable at 3/16 to 1/4 Inch (188 to 250 Mils) Thickness
- Non-Tainting, Odorless
- Behaves Plastically Under Impact / Deforms but will Not Crack or Debond
- High Abrasion Qualities Result from Its Aggregate Structure
- Extra Expansion Joints are Not Necessary
- Maintain and Extend Existing Expansion Joints up through the Sikafloor Purcem Flooring System
- Minimal Maintenance Costs, Superior Life Cycle Cost Advantage Versus Tile
Brand: Sikafloor Base: Urethane Finish Appearance: Oxide Red Type: 3-Component, Self-Leveling
Need help?
Our Smalley & Company team is here to help. With over 50 years of product expertise and hands-on experience in the Specialty Construction Supply industry. You can shop with confidence. Contact us by phone, email, or in-person at one of our branches.
(800) 777-6656
[email protected]